CCNA

0
445

CCNA R & S

  • Basics of Network Technologies
  • Cisco Router Hardware & Basic Administration
  • Cisco Router IOS Management
  • Introduction TCP/IP Protocol & Subnetting
  • IP Routing
  • RIP
  • EIGRP
  • OSPF
  • BGP
  • Network Address Translation (NAT & PAT)
  • Configuration of Cisco Switches
  • VLAN, Trunks & VTP
  • Spanning-Tree (STP)
  • Internet Protocol Version 6 (Ipv6)
  • WAN

CCNA LAB

Lab 1: Cisco CLI

Lab 2: Basic Switch Configuration

Lab 3: How a Switch Operates

Lab 4: Troubleshoot Switch Media and Port Issues

Lab 5: Inspect TCP/IP Applications (Wireshark and Debugging)

Lab 6: Start with Cisco Router Configuration

Lab 7: CDP

Lab 8: Concept of Default Gateway

Lab 9: Exploration of Packet Forwarding

Lab 10: Configure and Verify Static Routes

Lab 11: Configure and Verify ACLs

Lab 12: Configure a Provider-Assigned IP Address

Lab 13: Configure Static NAT

Lab 14: Configure Dynamic NAT and PAT

Lab 15: Troubleshoot NAT

Lab 16: Configure VLAN and Trunk

Lab 17: Troubleshoot VLANs and Trunks

Lab 18: Configure Root Bridge and Analyze STP Topology

Lab 19: Troubleshoot STP Issues in Depth

Lab 20: Configure and Verify Ether Channel

Lab 21: Configure a Router on a Stick (Inter VLAN Routing)

Lab 22: Configure a Cisco Router as a DHCP Server and DHCP Relay Agent

Lab 23: Troubleshoot DHCP Issues

Lab 24: Configure and Verify HSRP

Lab 25: Troubleshoot HSRP

Lab 26: Configure and Verify RIPv2

Lab 27: Troubleshoot RIPv2

Lab 28: Configure Basic IPv6 Connectivity

Lab 29: Configure IPv6 Static Routes

Lab 30: Use Troubleshooting Tools

Lab 31: Configure and Verify IPv4 Extended Access Lists

Lab 32: Troubleshoot IPv4 Network Connectivity

Lab 33: Configure and Verify IPv6 Extended Access Lists

Lab 34: Troubleshoot IPv6 Network Connectivity

Lab 35: Enhance Security of Initial Configuration

Lab 36: Limit Remote Access Connectivity

Lab 37: Configure and Verify Port Security

Lab 38: Configure and Verify NTP

Lab 39: Configure External Authentication Using RADIUS and TACACS+

Lab 40: Configure and Verify EIGRP

Lab 41: Configure and Verify EIGRP for IPv6

Lab 42: Configure and Verify Single-Area OSPF

Lab 43: Configure and Verify Multiarea OSPF

Lab 44: Configure and Verify OSPFv3

Lab 45: Troubleshoot Multiarea OSPF

Lab 46: Configure Serial Interface and PPP

Lab 47: Configure and Verify MLP

Lab 48: Configure and Verify PPPoE Client

Lab 49: Configure and Verify GRE Tunnel

Lab 50: Configure and Verify Single Homed EBGP

Gyani Labs